Infinity car speakers are undoubtedly one of the best out there. Infinity are known to deliver high quality and durable  audio equipments. Their range of speakers  offer a variety for car enthusiasts whose needs may differ.

Most vehicles factory audio setup leave a lot of desired. You don’t get as much power and quality as you want. For an add-on configuration, the three way system is the best choice if you want  the highest sound quality in your auto mobile. We have reviewed the best infinite car speakers and the ultimate decision will boil down to personal needs and preferences.

Best Infinite Speakers Buyer’s Guide

1. Infinity Kappa 62.11I 150W 6.5-Inch 2-Way Kappa Series Coaxial Speakers

If you are one of those folks who has spent a fortune in buying a nice new car only to realize that the factory audio system sounds like that it is stuck in 1968, you are in luck. The infinity Kappa 62 is one the most popular in the infinity car speakers line.

This high quality loud speaker will easily outperform anything that came with your car from the factory.

This 2ohm rated speaker is not only a perfect replacement for your starters, but it is also built to handle high power amplifiers. This means you will not need to get new speakers when you decide to put real power into your system.

The Kappa 62.11I are based on special composite basket formed from injection carbon glass metrics. This material is chosen for its resistance to environmental extremes as well its exceptional strength and rigidity.

The plus 1 woofer tone also benefits from some techno-wizardry. The patented tone design  provides greater tone area than competitive speakers of the same diameter to deliver extended low frequency response while special carbon injected glass fibre tone material is responsible for a lighter weight yet more rigid tone. This in turn reduces speaker sensitivity and reduces distortion.

The use of the 20hm impedance allows maximum performance by providing greater output. On the high frequency side of things, the Kappa 62.11I employ 1 inch soft-built edged driven tweeter.

These tweeters provide better power handling and lower distortion than a conventional tweeter as well as better dispersion characteristics. The Kappa’s tweeter also features infinity’s innovative and patented Uni-pivot tweeter aiming system allowing you to get the tweeters aimed at the optimum angle during the installation.

Features:

  • 6-3/4″ 2-way car speakers
  • Plus One+ glass-fiber woofer cone with hi-roll rubber surround
  • 1″ edge-driven, soft dome tweeter
  • included brackets allow mounting in a variety of 6-3/4″ and 6-1/2″ openings
  • 2-ohm impedance
  • power range: 5-75 watts RMS (225 watts peak power)
  • frequency response: 45-25,000 Hz
  • sensitivity: 95 dB
  • top-mount depth: 2-1/8″

What You Get In The Box:

  • Two 2-way speakers
  • 2 Grilles
  • 2 Grille rings
  • 2 Plastic 6-3/4″ adapter brackets
  • Eight 1-3/8″ Self-tapping screws
  • Eight 1/2″ Self-tapping screws
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • 2 Adhesive backed Infinity logo badges
  • Instructions

2. Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System

This is another high quality after-market infinity car speaker. If are you looking at running the sound off the head unit then then Infinity Reference 6030cs is just the perfect choice. It boasts of one+ engineering which aids retention of sound integrity.

4 Ohm Technology

There is always a challenge of safety when connecting speakers directly to the head unit  but not with infinity car speakers.  The 4 ohm technology developed by engineers at infinity makes it possible to hook up an aftermarket amplifier by directly running off the head unit. The installation is also quite easy and you can do it on your own provided you follow the instructions.

Features:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4″ Plus One+ Injection-Molded Polypropylene (IMPP) woofer with hi-roll rubber surround
  • adapter rings included for 6-1/2″ openings
  • 1″ edge-driven textile dome tweeter
  • Starfish™ mounting brackets for easier tweeter installation in factory locations
  • 2-way external crossover network (18 dB/octave, 3,500 Hz high- and low-pass)
  • 2-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
  • tweeter adjustment circuits (0, +3 dB)
  • power range: 2-90 watts RMS (270 watts peak power)
  • frequency response: 53-21,000 Hz
  • sensitivity: 93 dB
  • top-mount depth: 2-1/16″
  • warranty: 1 year

What You Get In The Box:

  • 2 Woofers
  • 2 Grilles
  • 2 Plastic mounting rings
  • 2 Crossovers
  • 2 Tweeters (each tweeter has attached 6″ speaker leads)
  • Two 41″ lengths of speaker wire with female slide connectors on one end and bare wire on other end
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish tweeter mounts
  • Twelve 1″ self-tapping screws
  • Four 3/4″ self-tapping screws
  • Four 5/8″ self-tapping screws
  • Four 3/8″ self-tapping screws
  • Eight 7/16″ self-tapping screws
  • 8 Speed clips
  • 2 Washers
  • 2 Nuts
  • 2 Foam gaskets
  • Two 15.5″ self-adhesive foam strips
  • Instructions
  • Warranty card
  • Infinity logo sticker

3. Infinity Reference 6500CX 6-1/2″ (165mm) two-way car audio component loudspeaker system

For this set of infinity car speakers, you will not need an extra amp. It produces much clearer and cleaner sound compared to other speakers in the same category. Unlike other infinity speakers, these one are actually mid/high-bass response which in essence means they can stand out on their own without necessarily needing a subwoofer.

The components will definitely produce superior sound quality better than the coax. To bring the real sound and quality, it is highly recommended you hook it up with an amp.

Features:

  • omponent speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4″ Plus One+ polypropylene woofer with hi-roll rubber surround
  • adapter rings included for 6-1/2″ openings
  • 3/4″ edge-driven textile dome tweeter
  • Starfish™ mounting brackets for easier tweeter installation in factory locations
  • 2-way external crossover network (18 dB/octave, 3,500 Hz high- and low-pass)
  • 3-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
  • tweeter adjustment circuits (0, +3 dB)
  • power range: 5-90 watts RMS (270 watts peak power)
  • frequency response: 53-21,000 Hz
  • sensitivity: 93 dB
  • woofer top-mount depth: 2-1/16″
  • warranty: 1 year

What You Get In The Box:

  • 2 Woofers
  • 2 Tweeters (each has attached 6″ speaker leads)
  • 2 Woofer grilles
  • 2 Grille frames
  • 2 Crossovers
  • 2 Plastic mounting rings (Chrysler/GM)
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish tweeter mounts
  • Eight 1-3/8″ Self-tapping Allen head screws
  • Eight 1″ Self-tapping pan head screws
  • Eight 1/2″ Self-tapping pan head screws
  • Six 5/8″ Self-tapping flat head screws
  • 3mm Allen head bit
  • 2 Washers
  • 2 Nuts
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • 2 Infinity logos
  • Template on box
  • Owner’s manual
  1. Infinity Kappa 693.11I 220W 6 x 9 Inches 3-Way Kappa Series

These speakers are designed to provide you high quality sound to replace your factory speakers. Featuring true 4ohm technology which makes them perfect for running directly with an aftermarket head unit or with an external amplifier.

Each cup of coaxial speaker features an adjustable tweeter control to easily tune your system which can balance off the sound in your car.

Due to the majority of the speakers being installed low in doors, the uni-pivot tweeter design brings the sound stage up to the listener for a more accurate experience.

The Kappa 693.11i features an edge driven dome tweeter for ultra crisp and clear high frequency reproduction. They can handle anything from 50-100 watts RMS of power depending on the size.

Features:

  • 6″x9″ 3-way car speakers
  • Plus One+ glass-fiber woofer cone with hi-roll rubber surround
  • 1″ edge-driven, soft dome tweeter and 1″ super tweeter
  • 2-ohm impedance
  • power range: 5-110 watts RMS (330 watts peak power)
  • frequency response: 35-30,000 Hz
  • sensitivity: 96 dB
  • top-mount depth: 3-3/16″

What You Get In The Box:

  • Two 3-way speakers
  • 2 Bottom mount adapter rings
  • 2 Grilles
  • 2 Grille rings
  • Eight 1-3/8″ Self-tapping screws
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • 2 Adhesive backed Infinity logo badges
  • Instructions

5. Infinity Kappa 52.11I 5-1/4″ 2-way car speakers

These speakers are an upgrade in the already well known line of speakers. It boasts superior sound quality and unique rugged design. If installed correctly, these infinity car speakers will bring out the detail and nuance of your favourite music.

Features:

  • 5-1/4″ 2-way car speakers
  • Plus One+ glass-fiber woofer cone with hi-roll rubber surround
  • 1″ edge-driven, soft dome tweeter
  • 2-ohm impedance
  • power range: 5-55 watts RMS (165 watts peak power)
  • frequency response: 55-25,000 Hz
  • sensitivity: 94 dB
  • top-mount depth: 2-3/16″

What You Get In The Box:

  • Two 2-way speakers
  • 2 Grilles
  • 2 Grille rings
  • Eight 1-3/8″ Self-tapping screws
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • 2 Adhesive backed Infinity logo badges
  • Instructions

Conclusion

For the infinity speakers, Kappas is like a sub culture. The super dome tweeter may be tiny but offers tremendous output. 3 way sounds way better than a 2 way but there is always the challenge of compatibility  and affordability. You don’t have to get rid of your 2 way if you want to upgrade. All you have to do is to add a 2 inch mid range which has its own crossover.