There are some key areas you should be looking at when searching for the best brake pads for your car. These factors include cold performance, hot performance, temperature range, noise, dust, pad wear and rotor wear.
A good brake pad should have slots to help remove debris from the pad or the rotor wearing and also prevent cracking when the pad is overheated.
Larger Pads Vs Smaller Pads
It is recommended that you always go with larger pads because you will have reduced pad wear as a result of better fade characteristics as the heat is distributed across a larger amount of material.
It is important to note that when you are using larger pads, you will be covering up that section of the brake disc and you won’t get much airflow.
Different brake pads are made of different materials and the common ones include ceramics, carbon an asbestos. To the average consumer, it may be irrelevant to know the material used but what’s more important is the coefficient of friction against the temperature of the pad.
Something like a family car is likely to have a high coefficient of friction at basically low temperature because there is not a lot of braking.
A few Things You Should Know About Brake Pads
- It is recommended that you change your brake pads after every 30000 miles covered. It could take a while if you only use your vehicle for short commutes.
2.Their prices vary. You can get brake pads for as little as $10 for a set of wheels to over $100 for the same.
- Not every brake brand or type will fit your vehicle. Before you go ahead and buy brake pads, make sure they are compatible with your car.
- Different kinds of brake pads are suitable for different kind of uses. For normal everyday use, ceramic brakes come highly recommended. If you want to take it a notch higher for increased performance then you can go for the Kevlar brake pads. If you are not satisfied with the two and want racing level of performance then you as well go for sintered bronze pads.
We cannot tell you the exact kind of brake pads to buy as it would be suicidal on our part. What we would do is to recommend top brands that have the best brake pads. You can always get one that is specifically tailored for your vehicle.
Best Brake Pads Brand To Buy For Your Car
- StopTech Performance Brake Pads
StopTech makes one of the best brake pads in the market today. On the road they are totally manageable and there is nothing that will give you the hint that they are performance brake pads.
They are absolutely fantastic on the tracks. You could do 7 or 8 laps on a circuit with nothing that would be considered a brake fade.
They are the perfect choice if you have fast vehicles like the Mercedes and will not produce as much brake dust compared to their competitors.
It has a high temperature compound to ensure that there is a consistency in performance even when there are some elements of wear and tear.
The factory style shims are meant to get rid of any pad-vibration related noise for smooth driving.
2. Akebono Premium Automotive Brake Pads
Akebono have been around since 1929 and offer the best brake pads for most vehicle models. The brake pads come factory installed and there are over 270 models to chose from. The brake pads come in different types.
There is the Pro Act Ultra Premium Brake Pads which are meant for a longer rotor life and clean wheels. If you have a European vehicle then the Euro ultra premium brake pads would be the best fit. Lastly for SUVS, light trucks, police vehicles and intense driving, there is the performance ultra premium designed for extreme driving.
Most of their brake pads are made from ceramic for superior high performance and to reduce brake squealing, vibration and groaning.
With Akebono you can be sure of the highest standards of quality given the fact they are largest brake manufacturers in the world and have been in the game for the last 75 years.
- Raybestos Premium Grade Automotive Brake Pads
Raybestos have also been in the game for a very long time and manufacture brakes for everyday use while engineered for premium performance.
It has high quality shims for durability and complete noise damping and can easily be mounted to the braking clippers. The ceramics and metal build comes in handy for those abrupt and sudden stops.
They also offer a wide selection of brake pads for different vehicles and you can be sure to get one that matches your vehicle.
- Bosch Premium Automotive Brake Pads
Bosch is on the high end of the spectrum when it comes to the best braking pads. Most German vehicles use bosch braking pads.
Their aero space alloy ensures better heat dissipation on the surface of the pads and maintains a protective film formation, protecting both the pad and the rotor.
It is also meets a new level of environmental standards as a result of the patented copper-free friction formula.
Boch also chooses the ideal type and selection of chemicals that form the protective layer on the surface of the rotor and pad. The layer can sometimes be visible even with the naked eye. With 70+ years of OE braking experience, you can never go wrong with Bosch.
- Wagner Automotive Brake Pads
Wagner brake pads are manufactured by Federal Mogul which is one of the biggest companies that manufactures car parts.
Federal mogul produces 40 million brake pads sets every year which is quite astonishing. With such large scale manufacturing, you can be sure to get the best brake pads that fit your vehicle.
The Wagner brand is the number one brake pad in North America for passenger cars. They have patents covering virtually every part of the braking system. Their Wagnar Thermoquiet brake pad has won the PACE award which is the automotive industry’s premier award for product innovation.
It features an exclusive technology called IMI which eliminates the need for conventional shim to dampen the brake noise. This brake through design dissipates the heat and the vibration for optimum performance.
The laser shaping feature for each system optimizes pad to rotor interface which gives you maximum stopping power. Then there is the advanced friction formulation which is precisely matched to the unique characteristics and demands of each application providing a longer pad life and less brake dust for the best brake pads. The brake material is validated by using the most stringent tests in the industry. Wanger’s brakes offer superior stopping, quieter braking, longer pad life and less brake dust.
- ACDelco High-Grade Vehicle Brake Pad
ACdelco has also been around for a couple of decades now and are well known for producing automotive parts. They offer inexpensive ceramic brake pads which are ideal for everyday use.
The braking pads have stamped backing plates which necessitates brake pulsation, reduction of noise and premature wear and tear.
Some things You May Have Not Known About the braking system
Did you know that the average driver applies their brakes over 200 times in a day? The brakes are the most critical system in a vehicle. There are approximately 40 parts in a vehicle’s braking system.
When you apply your brakes, hydraulic brake fluid is pushed from the master cylinder into the caliper. That caliper then squeezes the brake pad against the rotor creating friction which slows and stops the vehicle.
The material on brake pads gradually wears away each time the brakes are applied. The rotors are metal discs which also wear but at a slower rate. In addition to normal wear, brake pads can also become loose, cracked or broken. The disc rotors can also become grooved, pitted and warped from the continual heat and pressure from braking.
To ensure safety and reliability, regular brake inspection should be part of your vehicle’s ongoing maintenance and you should only use the best brake pads.