6 channel Amo

If you are looking for the best 6 channel amp then you are at the right place.  Most factory audio systems leave a lot to be desired. It even gets worse if you buy a second hand vehicle. That is why audio enthusiasts are opting for configurations so as to get the best out a car sound system.

6 Channel Amp Buyer’s Guide

1. Lanzar HTG668BT Heritage Series 4000 Watt 6-Channel

This is one of the few amplifiers leave alone a 6 channel amp that comes with a Bluetooth functionality. You can stream your favorite music from your phone or tablet straight to the amp. The best part is you can also stream live from the internet. You can use your spotify or pandora account to power your vehicle audio system, it doesn’t get cooler than that.

Features:

  • Full Range 2-Ohm Stable 6-Channel Amplifier
  • RMS Power Rating:

4 ohms: 250 watts x 6 chan.

2 ohms: 350 watts x 6 chan.

Bridged, 4 ohms: 1000 watts x 3 chan. 6 channel Amp

  • Total power output: 3000 watts
  • Pulse Width Modulated MOSFET power supply
  • LED power and protect indicators
  • Soft start turn-on/turn-off
  • Preamp RCA outputs to daisy chain multiple amps
  • Frequency Response: 10Hz-45KHz
  • Total Harmonic Distortion (THD): <0.01%
  • Input Sensitivity: 0.2 – 6V
  • Signal to Noise Ration: >90dB
  • Variable high-pass filter: 40Hz-250Hz
  • Variable low-pass filter: 40Hz-250Hz
  • Variable Bass Boost: 0 to +12 dB bass boost
  • Fuse Rating: 25 A x 3
  • Dimensions: 8.81″Wx 19.29″L x 2.24″H

 

Verdict

This amp is the heart of  modern day living. It is designed with convenience and the 21st century person in mind. Highly recommended given its price tag and value  for money.

  1. MB Quart NA540.6 Nautic Amplifier, 6-Channel 540-Watt

This a multi-purpose 6 channel amp that can be used in boats, yatchs and vehicles. The premise of the design and functionality comes from American Society for Testing and Materials. (ASTM)

Features:

  • RMS Power Rating:

4 ohms: 60 watts x 6 chan.

2 ohms: 90 watts x 6 chan.

Bridged, 4 ohms: 180 watts x 3 chan.

  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +9 dB bass boost at 45 Hz) 6 channel Amp
  • Soft start turn-on
  • 6/5/4/3/2 or Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity:
  • Level: 200mV-6V
  • Variable high-pass filter (250-4000 Hz)
  • Variable low-pass filter (40-250 Hz)
  • Dimensions: 9-1/2″Wx 17″L x 2-1/4″H

Verdict

If you are looking for great sound quality and power without breaking the bank, the . MB Quart NA540.6 Nautic Amplifier is the perfect choice.

3. Pyle PLMRA630BT Elite Series Waterproof

The Plye is beautiful designed with military specs and you will never have to worry about water damage as it is waterproof.

It has bridgeable multi channels  which provides both power and performance. The Bluetooth functionality also makes it easy to play music from your mobile devices.

It also features a heavy duty aluminum alloy heat-sink which helps in heat dissipation

Features:

RMS Power Rating:

4 x 100W + 2 x 250W RMS @ 4 Ohms

4 x 250W + 2 x 500W MAX @ 4 Ohms

4 x 175W + 2 x 400W RMS @ 2 Ohms 6 channel Amp

2 x 400W + 1 x 900W MAX @ 4 Ohms Bridged

  • Amplifier Class: AB
  • Marine Grade Rating: IP-01
  • Frequency Response: 15Hz – 30kHz
  • Input Impedance: 10k Ohm
  • Input Sensitivity: 250mV
  • Variable Bass Boost: 0 – 18dB @ 60Hz
  • S/N Ratio: >100dB
  • T.H.D.: <0.05%
  • Fuse Type: 40A x 2
  • Power Supply: DC 12V
  • Dimensions (L x W x H): 19.6” x 10.9” x 2.7”
  • Weight: 18.15 lbs.

Verdict

Come rain or shine, you can be sure your 6 channel amp is well protected. You can stream music from your favorite devices straight to your amplifier and you don’t have to break the bank to do so.

4. JL Audio XD600/6v2 6-channel car amplifier – 75 watts RMS x 6

This is a versatile amp that can power just any system no matter the configuration. The class D technology circuitry utilizes NexD switching for efficiency and fidelity.

The differential balance input helps in noise reduction which in turn necessitate clear signals.

Features:

  • RMS Power Rating (12.5V):
  • 4 ohms: 60 watts x 6 chan.
  • 2 ohms: 90 watts x 6 chan.
  • Bridged, 8 ohms: 120 watts x 3 chan.
  • Bridged, 4 ohms: 180 watts x 3 chan.
  • Unregulated MOSFET switching type power supply
  • NexD Ultra-High Speed Class D topology
  • LED power (green) and protect (red/yellow) indicators
  • Independent input sensitivity controls
  • State-of-the-art microelectronic components
  • 6/5/4/3 channel operation
  • Advanced Thermal Rollback System completely eliminates annoying thermal shut-down events
  • Studio-grade signal processing with fully variable crossover filters
  • Extruded aluminum alloy system setting security cover
  • Total amplifier efficiencies exceeding 80%
  • Noise-killing, highly flexible differential-balanced inputs
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty compact unitary cast alloy heat sink for extreme heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
  • Level: 100mV-4V
  • Variable high-pass filter (50-500 Hz, 12 dB/octave Butterworth)
  • Variable low-pass filter (50-500 Hz, 12 dB/octave Butterworth)
  • Damping factor: >150 @ 4 ohms per chan./ 50Hz
  • Frequency response: 12-22,000 Hz
  • Dimensions: 10-1/4″Lx 7-1/16″W x 2-1/16″H

5. Rockville RXM-S6 Marine/Boat 2600 Watt 6 Channel

This is a 6 channel amp with tones of configurations and comes with a PA microphone. All the 6 channels are bridgeable which means you can run the amp in multiple configuration set up. From its sleek clean design to its high quality components, you will be amazed at the  quality this Rockville 6 channel amp offers.

Features:

  • CEA Compliant Power Ratings:
    • 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N
    • 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD
    • 660 Watts (3 x 220 Watts) bridged @ 4 Ohms< 1% THD
  • RMS Power Ratings
    • 1300 Watts (6 x 220 Watts RMS) @ 2 ohms
    • 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged
    • 780 Watts (2 x 130 Watts RMS) @ 4 ohms
  • Peak Power: 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
  • High-Speed MOSFET Power Supply
  • Studio-Grade Bipolar Output Stage Transistors
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • CH 1 – 6
  • Low Pass 50Hz – 250Hz
  • High Pass 50Hz – 250Hz
  • Full IC-Controlled Protection Circuitry
  • Fully Adjustable Bass Equalization Control
  • 2 Ohm Stable Stereo
  • 4 Ohm Mono Bridgeable
  • 3 Channel Mixed-Mono Capable@ 4 Ohm
  • 2 CH / 4 CH/ 6 CH Input Mode Selector
  • Mute and Delay Soft Start System
  • Remote Dashboard Subwoofer Control
  • 8 Volt Preamp Circuitry
  • ELNA Brand Audiophile Quality Capacitors 6 channel Amp
  • Status Mode LED Indicator
  • Frequency Response: 10Hz – 40KHz
  • Minimum THD at Rated Power: < 0.05%
  • S / N Ratio: > 100dB
  • Damping Factor: > 200 @ 100Hz
  • Dual 60 Amp Maxi Fuses
  • Dimensions: (W x H x L) 8.5˝ x 1.8˝ x 16.1˝

 

Verdict

This amplifier sounds stunning with rich highs and super low tight bass. It is amp you  need to power your entire system with all the channels you will need at an affordable price.